This figure supplements the book’s Figure 42. The book’s figure describes the features that appear in the glow discharge. However, we felt that a color picture is required as a cross-check to help you correctly set up your own system. Continue reading
Category Archives: Instrumentation
X-Band Gunnplexer Microwave Transceiver for Microwave Optics Experiments
This is an inside view of our X-Band Gunnplexer transceiver (book‘s Figure 12) that should help you build your own units if you follow the schematics shown in the book’s Figure 11 . It is used throughout Chapter 1 for experiments in microwave optics, in Chapter 6 to measure single-slit diffraction, and in Chapter 7 to experiment with Quantum Tunneling. Continue reading
MX-10160 Gen III Image Intensifier Tube
This is the surplus Gen III image intensifier tube (an MX-10160 Gen III intensifier tube used in the helmet-mounted AN/AVS-6 “ANVIS” aviation night vision imaging system, which we purchased on eBay®) that we used to build our setup to image interference patterns from our single-photon two-slit setup (book‘s Figure 93). The tube is supplied by 3VDC from two AA cells. We used the same camera to record interference patterns from a single-photon Mach-Zehnder interferometry setup (book‘s Figure 132). Continue reading
Pictorial Instructions for Modifying ENI CD V700 into CDV700 Pro
We modified a surplus Civil Defense V-700 radiation survey meter made by Electro Neutronics Inc. (Model 6-b) into a very capable radiation counter capable of working with both Geiger-Müller and PMT scintillation probes. We modified the front panel to accommodate the new switches, connectors, and panel light. In addition, we placed a Veeder-Root count totalizer module on the side of the box. The new electronic components, including a Zener diode stack and a PMT preamplifier are wired directly to the original printed circuit board. Continue reading